
12:28:00 AM	Home \| Search \| Specifications \| Idea Gallery \| Site Map \| Missing Images Help

Application Instructions

Custom Screen
Printed Transfers

New
Glow in the Dark

Digital Transfers
Photo Prints
CAD-PRINTZ™ Opaque
CAD-PRINTZ™ Metallic
New CAD-PRINTZ™ Clear
New CAD-PRINTZ™ Sub Block
New CAD-PRINTZ™ Express Print

Frequently Asked Questions

Names & Numbers

CAD-PRINTZ™ Opaque

For application on all garment types and colors

Downloadable PDF

1. Prepare your machine
For Hotronix® Temperature: 305° (other machines at 315° or higher) Pressure: Med/Firm 6-8 Allow for warm up time.		Preheat Bottom Pad Before applying, lock the top platen down for 60 seconds. This helps the ink to flow properly during the application.
NOTE: These recommended time, temperature and pressure settings are for Stahls' Hotronix^® heat seal machines. Settings on other heat presses may vary based on their inconsistencies.

2. Preheat Garment
	A. Place garment on platen B. Press for 3-5 seconds or until there is no more steam to remove wrinkles & moisture. C. Check to be sure there are no obstructions such as buttons, pockets or seams. If there are, raise print area only with Print Perfect pad or mouse pad.

3. Remove the backing paper

Remove the backing paper from the transfer and discard. You should be left with the transfer on a clear plastic carrier.

4. Position & Press
	A. Place the transfer on the garment. You should be able to see the transfer as it will appear on the garment. B. Close the machine. C. Press for 5 seconds

5. Peel
	A. Open the machine. B. Peel off the clear plastic carrier quickly in a smooth, even motion.

6. Cover and Press
	A. Cover with the white transfer paper provided.* The transfer paper can be re-used. B. Close the machine. C. Press for 5 Seconds * A cover sheet has been provided. However, other cover sheets may be used for different finishes. (Ex: Teflon Sheet, Kraft Paper, Flexible Application Pad, etc)

7. Peel

A. Open the machine.
B. Peel off the transfer paper quickly in a smooth, even motion.

CAD-PRINTZ™ Metallic

For application on all garment types and colors
Metallic does not stretch.

Downloadable PDF

1. Prepare your machine
For Hotronix® Temperature: 330° (other machines at 340° or higher) Pressure: Med/Firm 6-8 Allow for warm up time.		Preheat Bottom Pad Before applying, lock the top platen down for 60 seconds. This helps the ink to flow properly during the application.
NOTE: These recommended time, temperature and pressure settings are for Stahls' Hotronix^® heat seal machines. Settings on other heat presses may vary based on their inconsistencies.

2. Preheat Garment
	A. Place garment on platen B. Press for 3-5 seconds or until there is no more steam to remove wrinkles & moisture. C. Check to be sure there are no obstructions such as buttons, pockets or seams. If there are, raise print area only with Print Perfect pad or mouse pad.

3. Remove the backing paper

Remove the backing paper from the transfer and discard. You should be left with the transfer on a clear plastic carrier.

4. Position & Press
	A. Place the transfer on the garment. You should be able to see the transfer as it will appear on the garment. B. Close the machine. C. Press for 5 seconds

5. Peel
	A. Open the machine. B. Peel off the clear plastic carrier quickly in a smooth, even motion.

6. Cover and Press
	A. Cover with the white transfer paper provided.* The transfer paper can be re-used. B. Close the machine. C. Press for 15 Seconds * A cover sheet has been provided. However, other cover sheets may be used for different finishes. (Ex: Teflon Sheet, Kraft Paper, Flexible Application Pad, etc)

7. Peel

A. Open the machine.
B. Peel off the transfer paper quickly in a smooth, even motion.

CAD-PRINTZ™ Clear

For application on all garment types
IMPORTANT: For white or light garments only.

Downloadable PDF

1. Prepare your machine
For Hotronix® Temperature: 305° (other machines at 315° or higher) Pressure: Med/Firm 6-8 Allow for warm up time.		Preheat Bottom Pad Before applying, lock the top platen down for 60 seconds. This helps the ink to flow properly during the application.
NOTE: These recommended time, temperature and pressure settings are for Stahls' Hotronix^® heat seal machines. Settings on other heat presses may vary based on their inconsistencies.

2. Preheat Garment
	A. Place garment on platen B. Press for 3-5 seconds or until there is no more steam to remove wrinkles & moisture. C. Check to be sure there are no obstructions such as buttons, pockets or seams. If there are, raise print area only with Print Perfect pad or mouse pad.

3. Position & Press
	A. Place the transfer on the garment ink side down. B. Close the machine. C. Press for 5 seconds

4. Peel
	A. Open the machine. B. Peel paper backing immediately after application.

5. Cover and Press
	A. Cover with the white transfer paper provided.* The transfer paper can be re-used. B. Close the machine. C. Press for 5 Seconds * A cover sheet has been provided. However, other cover sheets may be used for different finishes. (Ex: Teflon Sheet, Kraft Paper, Flexible Application Pad, etc)

6. Peel

A. Open the machine.
B. Peel off the transfer paper quickly in a smooth, even motion.

CAD-PRINTZ™ Express Print

For application on cotton, polyester or poly/cotton blends.

Downloadable PDF

1. Prepare your machine
For Hotronix® Temperature: 320° (other machines at 330° or higher) Pressure: Med/Firm 6-8 Allow for warm up time.		Preheat Bottom Pad Before applying, lock the top platen down for 60 seconds. This helps the ink to flow properly during the application.
NOTE: These recommended time, temperature and pressure settings are for Stahls' Hotronix^® heat seal machines. Settings on other heat presses may vary based on their inconsistencies.

2. Preheat Garment
	A. Place garment on platen B. Press for 3-5 seconds or until there is no more steam to remove wrinkles & moisture. C. Check to be sure there are no obstructions such as buttons, pockets or seams. If there are, raise print area only with Print Perfect pad or mouse pad.

3. Remove the backing paper

Remove the backing paper from the transfer and discard.
You should be left with the transfer on a clear plastic carrier.

4. Position & Press
	A. Place the transfer on the garment. You should be able to see the transfer as it will appear on the garment. B. Close the machine. C. Press for 15-20 seconds

5. Peel
	A. Open the machine. B. Peel off the plastic carrier - warm.

CAD-PRINTZ™ Sub Block

For application on all garment types and colors

Downloadable PDF

1. Prepare your machine
For Hotronix® Temperature: 330° (other machines at 340° or higher) Pressure: Med/Firm 6-8 Allow for warm up time.		Preheat Bottom Pad Before applying, lock the top platen down for 60 seconds. This helps the ink to flow properly during the application.
NOTE: These recommended time, temperature and pressure settings are for Stahls' Hotronix^® heat seal machines. Settings on other heat presses may vary based on their inconsistencies.

2. Preheat Garment
	A. Place garment on platen B. Press for 3-5 seconds or until there is no more steam to remove wrinkles & moisture. C. Check to be sure there are no obstructions such as buttons, pockets or seams. If there are, raise print area only with Print Perfect pad or mouse pad.

3. Remove the backing paper

Remove the backing paper from the transfer and discard.
You should be left with the transfer on a clear plastic carrier.

4. Position & Press
	A. Place the transfer on the garment. You should be able to see the transfer as it will appear on the garment. B. Close the machine. C. Press for 2 seconds

5. Peel
	A. Open the machine. B. Peel off the clear plastic carrier quickly in a smooth, even motion.

6. Cover and Press
	A. Cover with the white transfer paper provided.* The transfer paper can be re-used. B. Close the machine. C. Press for 12-15 Seconds * A cover sheet has been provided. However, other cover sheets may be used for different finishes. (Ex: Teflon Sheet, Kraft Paper, Flexible Application Pad, etc)

7. Peel

A. Open the machine.
B. Peel off the transfer paper quickly in a smooth, even motion.